AEON MIRA S 5/7/9

    If you would like to take a look or find out more, please fill in the form below:

    Product Description

    Meet the AEON MIRA S series laser engraving and cutting machines. A number of improvements and simplifications have been introduced from the regular MIRA series. One of the big improvements is the integrated high-quality camera, which makes it much easier to position materials on the workbench. There is now an additional drawer at the rear of the machine, which can be opened to allow longer materials to be fed through, making them even easier to cut or engrave. The ALL IN ONE system will make mass production much easier and more efficient. The MIRA S series is equipped with a magnetic lens, making maintenance much easier and faster. The laser machines in this series are even more adapted for faster engraving and cutting, so advanced users can take their business to the next level once again.

    Key features:

    • Class 1 Laser standard
      Meets the Class 1 Laser safety standard: the entire housing is fully sealed to prevent cutting fumes from passing through the gaskets.
    • ALL IN ONE system
      The laser machines already have improved water cooling, a smoke fan and an air pump (Optionally, a oil-free external compressor for clean cuts), so they will not need to be retrofitted externally. Improved cooling and fume extraction will make batch production easier and more efficient.
    • Door for material passage
      The rear of the machine is equipped with a door which, when opened, allows longer materials to be fed through and processed.
    • Built-in camera
      The high quality integrated camera allows you to position materials on the workbench even faster and more conveniently.
    • Magnetic lens
      Lens maintenance is now even easier - instead of the usual screws, the lens is now held in place by a magnet.
    • Multifunctional workbench
      Now you can both engrave and cut on the same honeycomb and aluminum cutting table.
    • Protected rails
      The rails and bearings are fully protected from possible dirt or dust, reducing the frequency of servicing.
    • Aesthetic and modern design
      AEON's distinctive machine tool design has taken the next step in the evolutionary process. Not only are the linear rails and bearing blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading outside your working area. Enjoy greater peace of mind with a laser system you can really rely on.
    • Intelligent diagnostic system
      The operational status of laser machines is available through a highly intelligent detection and diagnosis system. Some of the most important parameters, such as water temperature, flow rate, air pressure, can be accessed via the control panel.
    • Even faster engraving
      Engraving speeds of 1200 mm/s with a CO2 source and up to 2000 mm/s with an RF source!

    SPECIFICATION

    Model

    MIRA 5S MIRA 7S

    MIRA 9S

    Working Area

    300x500mm450x700mm

    900x600mm

    Machine Dimensions

    900x700x410mm1128x945x510mm

    1328x1070x530mm

    Laser Source and Output Power

    CO2(40/60W)

    RF 30/60W

    CO2(40/60/75/80W)

    RF 30/60W

    CO2(40/60/75/80/90/100W)

    RF 30/60W

    Z-axis

    140mm Adjustable140mm Adjustable

    150mm Adjustable

    Maximum Lifting Capacity

    15kg25kg

    25kg

    Workbench

    Honeycomb

    Honeycomb and aluminum blades workbench

    Power Supply Voltage

    220VAC 50Hz

    Power

    1200W

    Max Engraving Speed

    CO2 1200mm/s, RF 2000mm/s

    Max Cutting Speed

    680mm/s

    Min Engraving Size

    1 x 1mm

    CO2 Source Max Resolution

    1000 DPI

    RF Source Max Resolution

    4000 DPI

    Locating Precision

    < 0,01mm

    Cutting Thickness

    < 10mm (depends on material and source power)

    Air Assist

    85W Built-in Air Pump85W Built-in Air Pump

    85W Built-in Air Pump

    Cooling

    Water Cooler
    3000
    Water Cooler
    3000

    Water Cooler
    5000

    Blower

    Smoke Extraction
    Fan 75W
    Smoke Extraction
    Fan 110W

    Smoke Extraction
    Fan 110W

    Autofocus

    Integrated

    Software

    RDWorks (LightBurn recommended, separate paid license)

    Supported File Formats

    DSP/PLT/BMP/DXF/AI/DWG/SVG

    Rotary

    Additional Option (Chuck/Roller)

     

      OUR CONTACTS


      +370 60 667 238

      info@eltechnika.lt

      buhalterija@anodas.lt

      Savanorių pr. 151-1, Vilnius

      FOLLOW US